![]() You can always do the Wizard again and modify the settings. Unclick all the other models and nozzle diameters to avoid confusing the presets. Note that the E3D V6 0.25 mm nozzle has no dots, and looks almost the same as the E3D compatible 0.4 mm nozzle which ships with the Original Prusa MINI. The E3D 0.4 mm nozzles shipped with the Original Prusa MK3S+ have three dots ( blue arrows). ![]() On E3D V6 nozzles, you can identify the nozzle diameter by the dots around the rim of the nozzle. By contrast, if you want to speed up the print and the details are not as important, you can try using the 0.6 or 0.8 mm nozzle. We recommend using it only for very small objects, a few centimeters in size, as the print times are considerably longer compared to 0.4mm nozzles. To achieve fine detail, you can use a 0.25 mm nozzle. On top of that, you can always create and customize your own profiles. It is also accessible and reasonable to manufacture, which is probably why many 3D printers are supplied with brass nozzle.īesides the standard 0.4 mm diameter, we provide configurations for 0.25 mm, 0.6 mm, and 0. ![]() Brass nozzle 0.25/0.4/0.6/0.8īrass has excellent heat conductivity and is tough enough to print most "everyday" filaments. If you need to change or replace the nozzle, please refer to our guide Changing or replacing the nozzle (MK2.5S/MK3S/MK3S+) or Changing/replacing the nozzle (MINI).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |